- Tool Bags
- Windshield Bags
- Trunk, Travel & Roll Bags
- Sissy Bar Bags
- Easy Brackets
- Includes both left and right side brackets.
- Works with any flat back reinforced saddlebag.
- Limited warranty.
Will fit 1994 - 2003 Sportster models.
The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is deeper than the standard Easy Bracket to provide clearance outside the rear shock. The option Slimline None or Hardmount (S) may be chosen if a smaller saddlebag is used and located behind the rear shock. This model is typically used with small to medium saddlebags. Turn signals must be relocated off the fender on all Sportster models. TSSTLD turn signal relocation kit is available. For XL 1200N Nightster, 1200X 48, and XL 883N Iron turn signals and license plate must be relocated (see HD PN 73279-10).
The hardware sent will depend on the type of backrest. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.
To read information about the Easy Bracket warranty, click here.
Easy Brackets are shipped with all the hardware necessary to mount them to your motorcycle with only basic tools. Each kit comes with both left and right side brackets and (4) stainless steel docking points which are mounted to your motorcycle fender rail. They will replace the existing fender mounting bolts with longer bolts and the docking posts. The bracket is then mounted to the back of the saddlebags with the hardware provided. The bracket then slides onto the docking posts and locks into place.
This Item is NOT cover under our Lifetime Guarantee.